Carli Hydro Rear Bumpstops Dodge

To check current pricing on Carli Suspension products, please visit our online store, where we regularly feature product specials, reduced- and free-shipping deals, and an easy-to-navigate interface to help you quickly find the products you need.

Carli Rear Hydraulic Bump Stops - 03-08 DODGE 2500/3500 Dodge Ram

KLM Performance Inc. is proud to be a distributor of Carli Suspension products. This is the FIRST hydraulic bump stop on the market for a Dodge Ram. Carli Suspension Hydro Rear Bumpstops Dodge kit for the 03-08 DODGE 2500/3500 Dodge Ram does not reduce wheel travel. Only the final 2.5 of travel will utilize the bump stops. The Carli Suspension Hydro Rear Bumpstops Dodge act as a secondary suspension system. This system was designed to protect your truck from those unforeseen hits when pushing the limits of the suspension.

Part No: CS-RHB-1 Carli Suspension Hydro Rear Bumpstops Dodge

All of the energy used to compress the Carli Suspension Hydro Rear Bumpstops Dodge is dissipated as heat thus preventing the suspension from bottoming out, leaving everything still in place on your dash. Also, the rebound of the hydraulic bumpstop is designed to extend at a slower rate which will keep from forcing the axle back down, which would cause the suspension to bounce back. By slowing down the last couple of inches of compression travel, you reduce the amount of stored energy that needs to be controlled on the rebound side. This will help maintain control of the vehicle when off-roading at speed.

Superior Engineering for the Carli Suspension Hydro Rear Bumpstops Dodge. As pictured the rear bump stop kit includes a 1.5 .120 wall chromoly cross member with integrated 7/8 chromoly rod ends. This keeps the frame rails from rolling in towards each other, however the bearings allow normal chassis flex. This design won't stress the brackets and does not apply rigidity to the frame which could cause cracking.

This Carli Suspension Hydro Rear Bumpstops Dodge is a 100% BOLT ON system. Installs in about 30 minutes.

These Carli Suspension Hydro Rear Bumpstops Dodge can be utilized in conjunction with any of Carli suspension systems, or even stock applications.

Only minor welding is needed for installation. Since the 03-08 DODGE 2500/3500 Dodge Ram is based on a hydroformed frame type, which should not be welded on.

Carli | Hydro Rear Bumpstops | Dodge

Featured Performance Products

Carli Hydro Rear Bumpstops Dodge

Carli Rear Hydraulic Bump Stops - 03-08 DODGE 2500/3500 Dodge Ram

DODGE

Chevy

FORD

JEEP

NISSAN

TOYOTA