BD 62-0200 Soltek LED
Headlight, Driving
The Soltek LED driving pattern provides an all-around even light
spread for use in a wide variety of terrain. Heavy duty construction and
long life makes this an ideal offroad light for any vehicle. The Baja
Designs Soltek LED lights offer a unique feature of being able to change
from one light pattern to another. This is accomplished by simply
changing out the lenses. This way if you purchase a Driving Light you
could change to a Wide Driving or Spot by simply changing the lenses.

BD 62-0205 Soltek LED Headlight, Spot
The Soltek LED spot (or pencil) pattern compresses the light into a
tight beam that will illuminate objects at a greater distance than the
driving or wide-driving patterns. The spot beam is recommended for use
in conjunction with other beam patterns for optimum performance. Heavy
duty construction and long life makes this an ideal offroad light for
any vehicle. The Baja Designs Soltek LED lights offer a unique feature
of being able to change from one light pattern to another. This is
accomplished by simply changing out the lenses. This way if you purchase
a Driving Light you could change to a Wide Driving or Spot by simply
changing the lenses.

BD 62-0210 Soltek LED Headlight, Wide
Driving
The Soltek LED Wide-Driving pattern has a wide pattern that is smooth
and even. The Wide-Driving beam is great for foggy or dusty conditions,
and when used in conjunction with driving or spot beams makes a superior
lighting set-up. Heavy duty construction and long life makes this an
ideal offroad light for any vehicle.The Baja Designs Soltek LED lights
offer a unique feature of being able to change from one light pattern to
another. This is accomplished by simply changing out the lenses. This
way if you purchase a Driving Light you could change to a Wide Driving
or Spot by simply changing the lenses.

BD
62-0214
Soltek, LED Cornering Lens and
Gasket Replacement
Replacement lens for use with the Soltek
LED headlight. Lens comes with replacement gasket. Sold each. The Baja
Designs Soltek LED lights offer a unique feature of being able to change
from one light pattern to another. This is accomplished by simply
changing out the lenses. This way if you purchase a Driving Light you
could change to a Wide Driving or Spot by simply changing the lenses.

BD
62-0216
Soltek, LED Cornering Lens and
Gasket Replacement
Replacement lens for use with the Soltek
LED headlight. Lens comes with replacement gasket. Sold each.The
Baja Designs Soltek LED lights offer a unique feature of being able to
change from one light pattern to another. This is accomplished by simply
changing out the lenses. This way if you purchase a Driving Light you
could change to a Wide Driving or Spot by simply changing the lenses.

BD
62-0218
Soltek, LED Cornering Lens and
Gasket Replacement
Replacement lens for use with the Soltek
LED headlight. Lens comes with replacement gasket. Sold each. The Baja
Designs Soltek LED lights offer a unique feature of being able to change
from one light pattern to another. This is accomplished by simply
changing out the lenses. This way if you purchase a Driving Light you
could change to a Wide Driving or Spot by simply changing the lenses.

Wire
Your Light Bar!
To further simplify your
Modular Light Bar installation, we offer a universal
wiring harness kit and two power "splitter" kits. The
wiring harness is designed specifically for routing
power to the top of your vehicle. The Splitter Kits plug
directly into the wiring harness allowing you to switch
any number of lights in any configuration you choose
(switches not provided.) Each light comes with 10" of
wire cable from the back. See the example below.
Wiring
Harness Kit
• 8’ extension with 2 power and 2
ground leads using sealed weather-pack connectors
• 1 end left un-terminated for
routing through tubing
• Wire terminals and tube
grommets provided
• 14 gauge wire to handle high
current loads
• Detailed installation
instructions included

2 & 3 Way Splitter Kits
• Splits one
harness power lead into two or three
• Plugs directly
into Wiring Harness Kit (above) using sealed
weather-pack connectors
• Offset
connector lengths
• 14 gauge wire
to handle high current loads

If you build a 5
light bar as shown above and would like to switch the
two "A" lights separately from the three "B" lights. You
will need:
1 Wiring Harness
Kit - Runs power to the
light bar.
1 2-Way Splitter
Kit - Joins one of the
two connectors from the Wiring Harness Kit to the "A"
lights.
1 3-Way Splitter
Kit - Joins the
remaining connector from the Wiring Harness Kit to the
"B" lights.
SAMPLE LIGHT BARS
Shown below are
three sample light bars along with the kits that go into
building them. The lights must be purchased separately.
There are many lens, bulb, and color options available.
Give us a call to order or visit our online store to buy
lights and accessories.
Parts
List

Parts List
•
2 Fuego Ring Kits
•
3 Spacer Kits
•
1 Mount Kit (Clamp-on
Shown)
Parts
List
•
1 Mount Kit (Clamp-on
Shown)
MORE LIGHT BAR IDEAS

|