Featured Performance Products

DYNATRAC Free-Spin Hub Kit Dodge


To check current pricing on Dynatrac products, please visit our online store, where we regularly feature product specials, reduced- and free-shipping deals, and an easy-to-navigate interface to help you quickly find the products you need.


DYNATRAC CR60-3X1104-A Free-Spin Hub Kit Dodge 2000-2008

buy dynatrac

Part No: CR60-3X1104-A

The Dynatrac CR60-3X1104-A Free Spin Hub Conversion for 2000 - 2008 Dodge Ram 2500 and 3500 4X4 trucks.

The Dynatrac 00-08 Dodge 2500/3500 Free Spin Kit - Stage 1 (ABS Included) CR60-3X1104-A was designed specifically to remove a weak link in the popular Dodge Ram 4x4 trucks.

The Dynatrac Dodge Free-Spin Heavy Duty Hub Conversion Kit CR60-3X1104-A works on the following Dodge Ram trucks:

  • 2000 - 2008 2500 4X4
  • 2000 - 2008 3500 4X4 SRW
  • 2000 - 2008 3500 4X4 DRWDynatrac Free Spin Hub

The 2000 to 2008 Dodge Ram trucks have a weak link in there front end. This weak link is the unitized bearing. When the unit bearing fails, the vehicle is often immediately disabled and cannot be driven anywhere until the unit bearing has been completely replaced. That means towing, downtime, expensive dealer repairs and a ruined vacation or lost revenue for a work truck. Now there is a way to prevent such failures by installing a Dynatrac Free Spin Hub Kit on your 2000 - 2008 Dodge Ram.

As an industry leader, Dynatrac has taken up the challenge of building the better truck. The Dynatrac CR60-3X1104-A Free-Spin Hub Kit was designed specifically to remove a weak link in popular Dodge Ram 4x4 trucks, The Dynatrac CR60-3X1104-A Free-Spin Heavy Duty Hub Conversion Kits replace the factory unit bearings with fixed spindles for superior strength, improved fuel economy, and smooth performance. The CR60-3X1104-A Dodge Ram Free Spin Hub Kit includes inexpensive, serviceable Timken bearings, chromoly spindles, cast nodular wheel hubs, Warn Premium manual locking hubs, and massive 1.50” diameter, 35-spline outer axle shafts. All made in the USA.

The Dynatrac CR60-3X1104-A Free-Spin Heavy Duty Hub Conversion Stage I Kit - Dodge 2000 - 2008 contains the following:

  • 2 - 8 on 6.5 Dynatrac wheel hubs (customer to re-use rotor)
  • 2 - Dynatrac Heavy-duty spindle kits
  • 2 - Dynatrac Heavy-duty, 35-spline, outer axle shafts
  • 1 - Set of Warn Premium manual locking hubs (35-spline)
  • 1 - User serviceable wheel bearings, races and seals
  • 1 - ABS tone rings and sensor mounts (‘00 and newer only)
  • Inner and outer Wheel Bearings
  • Races, Seals and Hardware

Simple bolt on installation - No machining or welding required

Dramatic increase in axle strength and reliability with 35-spline 1.50” shafts.

FUEL and MAINTENANCE Savings Start NOW when the CR60-3X1104-A Dodge Free Spin Hub Kit is installed in your Dodge Ram truck.

You will feel a dramatic reduction in front end vibrations once your able to unlock the front axle with Dodge replacement front hubs.

Manual-locking hubs reduce wear and increase fuel economy by preventing parts from rotating constantly during 2WD operation. Customers who purchased this Dynatrac Dodge Free-Spin Kit report fuel economy increases of 1 to 3 miles per gallon.


DYNATRAC CR60-3X1104-B Free-Spin Hub Kit 1994-1999 Dodge

buy dynatrac

Part No: CR60-3X1104-B

The DYNATRAC CR60-3X1104-B Heavy Duty Hub Conversion Kit for 1994-1999 Dodge 2500 and 3500 puts an end to the trouble sum front wheel bearings found in the Dodge Ram pickup trucks.

When factory specs don't cut it. No matter how you use your truck, the engineers at Dynatrac understand that the measure by which all parts are judged is strength and performance. From light duty to extreme use, your vehicle should be built for reliability and endurance under any conditions. And all too often, the original equipment falls short. This is why Dynatrac created the CR60-3X1104-B Free-Spin Hub Kit.

As an industry leader, Dynatrac has taken up the challenge of building the better truck. Designed specifically to remove a weak link in Dynatrac Free Spin Hubpopular Dodge Ram 4x4 trucks, Dynatrac's CR60-3X1104-B Heavy Duty Hub Conversion Kit for 1994-1999 Dodge 2500 and 3500Free-Spin Heavy Duty Hub Conversion Kits replace the factory unit bearings with fixed spindles for superior strength, improved fuel economy, and smooth performance.

The DYNATRAC CR60-3X1104-B Heavy Duty Hub Conversion Kit for 1994-1999 Dodge 2500 and 3500 includes the following items:

  • Complete kit includes inexpensive, serviceable Timken bearings
  • Chromoly spindles
  • Cast nodular wheel hubs
  • Set of Warn Premium manual locking hubs
  • Massive 1.50” diameter, 35-spline outer axle shafts
  • All made in the USA

This combination of parts has been designed and tested to provide the best longevity and reliability under the most severe use. While the factory unit bearing is non-serviceable and prone to failure, the Free-Spin hub conversion kit is the answer.

When a unit bearing fails, the vehicle is often immediately disabled and cannot be driven anywhere until the unit bearing has been completely replaced. That means towing, downtime, expensive dealer repairs and a ruined vacation or lost revenue for a work truck.

DYNATRAC CR60-3X1104-B Heavy Duty Hub Conversion Kit for 1994-1999 Dodge 2500 and 3500 includes:

  • 2 - 8 on 6.5 Dynatrac wheel hubs (customer to re-use rotor)
  • 2 - Dynatrac Heavy-duty spindle kits
  • 2 - Dynatrac Heavy-duty, 35-spline, outer axle shafts
  • 1 - Set of Warn Premium manual locking hubs (35-spline)
  • 1 All User serviceable wheel bearings, races and seals
  • 1 ABS tone rings and sensor mounts (‘00 and newer only)

For recreational truck enthusiasts, the Free-Spin hub conversion eliminates a weak link that could easily leave you stranded. For commercial truck owners and fleet managers, who rely on their rigs 24/7 to get the job done, the Free-Spin hub conversion ensures that your trucks are on the road making you money. Improved Fuel economy and smoother performance is an additional bonus.

FUEL and MAINTENANCE Savings Start NOW when the CR60-3X1104-A Dodge Free Spin Hub Kit is installed in your Dodge Ram truck.

You will feel a dramatic reduction in front end vibrations once your able to unlock the front axle with Dodge replacement front hubs.

Manual-locking hubs reduce wear and increase fuel economy by preventing parts from rotating constantly during 2WD operation. Customers who purchased this Dynatrac Dodge Free-Spin Kit report fuel economy increases of 1 to 3 miles per gallon.


DYNATRAC Spin Doctor Hub Conversion for 1994-1999 Dodge 2500 and 3500

buy dynatrac

Part No: Dynatrac Dodge FSHK 94-99

The DYNATRAC CR60-3X1104-B Heavy Duty Hub Conversion Kit for 1994-1999 Dodge 2500 and 3500 puts an end to the trouble sum front wheel bearings found in the Dodge Ram pickup trucks.


Dynatrac Free Spin Hub

 


  • Dodge - Cummins
    DODGE

    Cummins

  • Chevy GMC
    Chevy

    GMC

  • Ford
    FORD

    Ford - Mercury

  • Jeep
     
    JEEP
  • Nissan
     
    NISSAN
  • Toyota
     
    TOYOTA