Fab Fours Dodge Replacement Bumpers
We stock all FabFours Dodge Bumpers,
Ford Bumpers, Chevy Bumpers, Toyota Bumpers, Nissan
Bumpers, and Jeep Bumpers. To see a particular line we
carry other than these Dodge replacement bumpers, please visit the respective pages:
Dodge 03-05 Front Winch
/ Pre-Runner A1052 Replacement Bumper
 Designed
to be the ultimate in functionally-stylish front end
protection, the Fab Fours front winch bumper will set
the new standard in truck fascia customization. This
"stylish" design enhances the visual impact of the
truck, while remaining lightweight and staying close to
filling the "stock envelope." Fab Fours has created a
new class of bumper that has not been seen before in the
aftermarket.
Features:
-Curved plate that matches the contour under the
headlights.
-3-piece mounting system to allow a "custom" fit.
-Light cut-outs and Hella 90mm fog and 60mm turn
indicator lights are included with the bumper!
-
Built around the Warn 16.5 winch, will even fit with
Cummins Diesel engine.
Materials:
1/ 4" plate reinforcements and mountings. 10 gauge steel
plate construction for a lightweight design. 2"Center
section, 1.75" outer tube. 1" D-Ring mounts
Finish:
Fab Fours textured powder coat finish.
Size/Weight:
Length: 84" Height: 20" Width: 29" Weight: 240Lbs
Dodge 2003 Front
Non-Winch B1050 Replacement Bumper
 Designed
to be the ultimate in functionally-stylish front end
protection, the Fab Fours front winch bumper will set
the new standard in truck fascia customization. This
"stylish" design enhances the visual impact of the
truck, while remaining lightweight and staying close to
filling the "stock envelope." Fab Fours has created a
new class of bumper that has not been seen before in the
aftermarket.
Features:
-Curved plate that matches the contour under the
headlights.
-3-piece mounting system to allow a "custom" fit.
-Light cut-outs and Hella 90mm fog and 60mm turn
indicator lights are included with the bumper!
Materials:
1/4" plate reinforcements and mountings. 10 gauge steel
plate construction for a lightweight design. 2.5" tube
center section with 2" outer wings. 1" D-Ring mounts
Finish:
Fab Fours textured powder coat finish.
Size/Weight:
Length: 84" Height: 34" Width: 29" Weight: 190Lbs
Dodge 2003 Front Winch / No
Tube A1051 Replacement
Bumper
 Designed
to be the ultimate in functionally-stylish front end
protection, the Fab Fours front winch bumper will set
the new standard in truck fascia customization. This
"stylish" design enhances the visual impact of the
truck, while remaining lightweight and staying close to
filling the "stock envelope." Fab Fours has created a
new class of bumper that has not been seen before in the
aftermarket.
Features:
-Curved plate that matches the contour under the
headlights.
-3-piece mounting system to allow a "custom" fit.
-Light cut-outs and Hella 90mm fog and 60mm turn
indicator lights are included with the bumper!
- Built around the Warn 16.5 winch, will even fit with
Cummins Diesel engine.
Materials:
1/4" plate reinforcements and mountings. 10 gauge steel
plate construction for a lightweight design. 2" D-Ring
mounts
Finish:
Fab Fours textured powder coat finish.
Size/Weight:
Length: 84" Height: 20" Width: 29" Weight: 210Lbs
Dodge 2003 Winch Bumper
A1050 Replacement Bumper
 Designed
to be the ultimate in functionally-stylish front end
protection, the Fab Fours front winch bumper will set
the new standard in truck fascia customization. This
"stylish" design enhances the visual impact of the
truck, while remaining lightweight and staying close to
filling the "stock envelope." Fab Fours has created a
new class of bumper that has not been seen before in the
aftermarket.
Features:
-Curved plate that matches the contour under the
headlights.
-3-piece mounting system to allow a "custom" fit.
-Light cut-outs and Hella 90mm fog and 60mm turn
indicator lights are included with the bumper!
- Built around the Warn 16.5 winch, will even fit with
Cummins Diesel engine.
Materials:
1/4" plate reinforcements and mountings. 10 gauge steel
plate
construction for a lightweight design. 2.5" tube
center section with 2" outer wings. 1" D-Ring mounts
Finish:
Fab Fours textured powder coat finish.
Size/Weight:
Length: 84" Height: 34" Width: 29" Weight: 260Lbs
Dodge 2006 Front
Non-Winch B1150 Replacement Bumper
 Designed
to be the ultimate in functionally-stylish front end
protection, the Fab Fours front winch bumper will set
the new standard in truck fascia customization. This
"stylish" design enhances the visual impact of the
truck, while remaining lightweight and staying close to
filling the "stock envelope." Fab Fours has created a
new class of bumper that has not been seen before in the
aftermarket.
Features:
-Curved plate that matches the contour under the
headlights.
-3-piece mounting system to allow a "custom" fit.
-Light cut-outs and Hella 90mm fog and 60mm turn
indicator lights are included with the bumper!
Materials:
1/4" plate reinforcements and mountings. 10 gauge steel
plate construction for a lightweight design. 2.5" tube
center section with 2" outer wings. 1" D-Ring mounts
Finish:
Fab Fours textured powder coat finish.
Size/Weight:
Length: 84" Height: 34" Width: 29" Weight: 190Lbs
Dodge 2006 Front Winch /
Pre-Runner A1152 Replacement Bumper
 Designed
to be the ultimate in functionally-stylish front end
protection, the Fab Fours front winch bumper is
engineered to accept the WARN 16.5 winch.
Features:
-Curved plate that matches the contour under the
headlights.
-Engineered winch mount that accommodates the largest
winch on the market.
-3-piece mounting system to allow a "custom" fit.
-Light cut-outs and Hella 90mm fog and 60mm turn
indicator lights are included with the bumper!
- Built around the Warn 16.5 winch, will even fit with
Cummins Diesel engine.
Materials:
5/16" Winch mount plate recommended by WARN for mounting
a 16.5 winch. 1/4" center section, winch tray, and
mounts. 3/16" wings, 10 guage cosmetic pieces. 10 gauge
steel plate construction for a lightweight design.
2"Center section, 1.75" outer tube. 1" D-Ring mounts
Finish:
Fab Fours textured powder coat finish.
Size/Weight:
Length: 86" Height: 35" Width: 32.5" Weight: 240Lbs
Dodge 2006 Front
Winch Bumper / No tube
A1151
Replacement Bumper
 Designed
to be the ultimate in functionally-stylish front end
protection, the Fab Fours front winch bumper will set
the new standard in truck fascia customization. This
"stylish" design enhances the visual impact of the
truck, while remaining lightweight and staying close to
filling the "stock envelope." Fab Fours has created a
new class of bumper that has not been seen before in the
aftermarket.
Features:
-Curved plate that matches the contour under the
headlights.
-3-piece mounting system to allow a "custom" fit.
-Light cut-outs and Hella 90mm fog and 60mm turn
indicator lights are included with the bumper!
- Built around the Warn 16.5 winch, will even fit with
Cummins Diesel engine.
Materials:
1/4" plate reinforcements and mountings. 10 gauge steel
plate construction for a lightweight design. 2" D-Ring
mounts
Finish:
Fab Fours textured powder coat finish.
Size/Weight:
Length: 84" Height: 20" Width: 29" Weight: 210Lbs
Dodge 2006 Winch Bumper A1150
Replacement Bumper
 Designed
to be the ultimate in functionally-stylish front end
protection, the Fab Fours front winch bumper is
engineered to accept the WARN 16.5 winch.
Features:
-Curved plate that matches the contour under the
headlights.
-Engineered winch mount that accommodates the largest
winch on the market.
-3-piece mounting system to allow a "custom" fit.
-Light cut-outs and Hella 90mm fog and 60mm turn
indicator lights are included with the bumper!
- Built around the Warn 16.5 winch, will even fit with
Cummins Diesel engine.
Materials:
5/16" Winch mount plate recommended by WARN for mounting
a 16.5 winch. 1/4" center section, winch tray, and
mounts. 3/16" wings, 10 guage cosmetic pieces. 2.5" tube
center section with 2" outer wings. 1" D-Ring mounts
Finish:
Fab Fours textured powder coat finish.
Size/Weight:
Length: 86" Height: 35" Width: 32.5" Weight: 260Lbs
Dodge Ram Rear Bumper W1050
Replacement Bumper
 Rear
replacement bumper that integrates the existing receiver
hitch. In addition to added style and formed-steel
durability, the vehicle gains lower steps and recovery
points.
Features:
-Integrated steps on either side of the tailgate.
-Durable formed steel construction.
-Retain OEM receiver hitch and wiring locations.
-1" D-Ring recovery points.
Materials:
1/4" keyed and gusseted mounts, 3/16" construction with
10 gauge cosmetic pieces, 1" D-Ring mounts.
Finish:
Fab Fours textured powder coat finish.
Size/Weight:
Length:
80" Height: 9" Width: 10.5" Weight: 120Lbs
About Fab Fours Replacement Bumpers
Fab Fours Inc.
is a replacement bumper manufacturer dedicated to pushing the boundaries
of innovation and design ingenuity in every
performance product they develop. Ranging from
a tow rig to a trail rig, you can count on the
underlying fundamentals at
Fab Fours
to ensure that you have the best replacement
bumpers at the best price.
 A
key differentiator within the walls of
Fab Fours is the
customer-oriented-business-first mentality that
drives their performance in the manufacture of
replacement bumpers. While their founders are
intense off-road enthusiasts, they are not
coming from the traditional hobby-first-turned-part-time-turned-business model that generally
characterizes our industry.
The two founders come from
complementary backgrounds in engineering, and
Industrial distribution. After time and
experience gained in diversified mature industries, they realized that their skills and
strengths could be directly applied to the
off-road industry in general an to
replacement bumpers in particular to create a company that ran
with the efficiency, outstanding customer
service, and cutting edge technology seen in
their former careers.
By combining the absolute best 3D design
rendering capabilities with advanced sales
forecasting and business strategy,
Fab
Fours is confident that they can lead
the industry in new replacement bumper design
quality.
It is their sincere goal to stay at the
fore-front in the replacement bumper industry,
working with competitors and partners alike to
continually break new barriers in off-road
capability and performance. We have all
witnessed the insane growth within the industry
over the last six years.
All indications lead to
even faster growth over the next 5-10 years as
rock-crawling and desert racing hit the
mainstream with full throttle, and
Fab
Fours will be there stomping on the gas
with the best of them.
Heavy Duty Bumpers, After Market
Bumpers, Front Bumper Replacement, Rear Bumper
Replacement, Bumper Replacement.
KLM Inc. Carries the Full
line of Fab Fours Bumpers:
Replacement Bumpers for Jeeps
|
Replacement Bumpers for Chevy
Trucks |
Replacement Bumpers for Nissan
Trucks |
Replacement Bumpers for Toyota
Trucks |
Replacement Bumpers for Ford Trucks
|
Replacement Bumpers for Dodge
Trucks |
