FASS STK-1002 5/8" Suction Tube Kit
To check current pricing on FASS products, please visit our online store for FASS fuel pumps, where we regularly feature product specials, reduced- and free-shipping deals, and an easy-to-navigate interface to help you quickly find the products you need.
FASS STK-1002 5/8" Suction Tube Kit
The FASS STK-1002 5/8" Suction Tube Kit is the newest product introduced by Diesel Fuel Systems. The FASS STK-1002 5/8" Fuel Suction Tube Kit is used to by pass in-tank pumps and works with all of the FASS Fuel Systems.
The FASS STK-1001 5/8" Fuel Suction Tube Kit is a vital component to insure you get the maximum fuel flow from your FASS Fuel System. In order to get the best performance from your FASS System you need to have an adequate supply of fuel from the fuel tank.
FASS Systems that are hooked up directly to the OEM fuel port on top of tank will have a reduced flow of fuel. Any FASS System that is designed to move high volumes of fuel needs to have the FASS STK-1002 5/8" Suction Tube Kit installed with the system.
The FASS STK-1002 5/8"" suction tube kits allows the fuel to be picked up at a point in the fuel tank with virtually no restriction in flow and minimal friction loss.
The FASS STK-1002 5/8" Suction Tube Kit allows all of the FASS Pumps to function at there highest potential flow rates.
By installing the FASS STK-1002 5/8" Suction Tube Kit in the tank you are insuring that your FASS System will get the maximum flow of fuel starting at the tank. 
The addition of the FASS STK-1002 5/8" Suction Tube Kit will help to reduce any potential friction loss allowing for the maximum flow of fuel to any FASS pump and the entire fuel delivery system.
The installation of the FASS STK-1002 5/8" Suction Tube Kit is used to by pass the OEM fuel pickup points in your trucks fuel tank. The FASS STK-1002 5/8" Suction Tube Kit is installed by drilling a hole in the top of your tank to install the pick up.
The FASS STK-1002 5/8" Suction Tube Kit includes:
* 5/8” Bulkhead - # BHF-1002
* Grommet - # RS2770
* 5/8” MPT Suction 12’1/4” Length Suction Tube - # ST-1001
* 5/8” MPT (Male Pipe Thread) x 1/2” Flare (90 Degree) - # 10-299
* 5/8” x 1/2”Female Push Lock - # PL-1002
* 1/2” x 1/2” Female Push Lock - # PL-1005
The FASS STK-1002 5/8" Suction Tube Kit is approved for use in the following diesel powdered vehicles:
* 1994 - 2011 Dodge Ram Cummins - 5.9L / 6.7L - 2WD and 4WD trucks
* 1999 - 2011 Ford Powerstroke - 7.3L / 6.0L / 6.4L - 2Wd and 4WD trucks
* 2001 - 2011 GM Duramax - 6.6L - 2WD and 4WD trucks
The installation of the FASS STK-1002 is used to by pass the OEM fuel pickup points in the tank.
The FASS STK-1002 will not interfere with the OEM vehicles Fuel Gauge. The FASS Pump will not draw through the in-tank pump due to the high flow rates of the FASS system. So you will need to install a Suction Tube Kit. (STK-1002) The FASS STK-1002 Suction tube kits allows the fuel to be picked up at a point in the fuel tank with virtually no restriction in flow and minimal friction loss. The FASS STK-1002 5/8" Fuel Pickup Tube Kit allows the FASS Pump to function at its highest potential flow rates.
Because of the higher fuel flow these systems have to offer, you may encounter stock fuel module problems. By installing the FASS STK-1002 will solve these problems.
The FASS STK-1002 is installed by drilling a hole in the top of your tank to install the pick up. You just leave the pump in the tank and don't mess with it. It will be unplugged when you plug in the FASS harness up at the engine.
NOTE: The FASS STK-1002 Kit is Included in all FASS Systems for the 2005 and newer Dodge Ram trucks!
FASS STK-1002 5/8" Suction Tube Kit.
