Dodge Ram Track Bar
KLM
Performance is proud to carry several Solid Steel Industries
Dodge Ram track bar products. To check pricing on the full line of Solid
Steel Dodge Ram track bar products, please visit the
Solid Steel Industries section in our online
store, or give us a call.
Scroll down for
additional information about Dodge Ram track bar
parts:
The
Solid Steel Industries Dodge Ram track bar:
The
new Dodge Ram track bar and the new Track Bar
Conversion Kit eliminate the troublesome ball joint
on the OEM track bar on 1994 to 2002 Dodge 4x4's.
Dodge Ram track bar
The
new Dodge Ram track bar and the new Track Bar
Conversion Kit eliminate the troublesome ball joint
on the OEM track bar on 1994 to 2002 Dodge 4x4's. Using
high quality rubber bushings provides smooth quiet
operation, with little or no vibration sent back
to
the steering wheel or elsewhere on the truck.
This photo shows both the track bar and the track
bar replacement bracket.
All Solid Steel parts are BLACK. Red is used for
illustration purposes only.
The
hardness of the rubber bushing on the Dodge Ram
track bar eliminates the spongy
feeling found in other, softer, rubber bushings,
while still providing the right amount of deflection
to reduce wear and hammering. These
bushings do not hammer and wear out like steel rod
ends, Heim joints, and urethane bushings.
This
Dodge Ram track bar is fully adjustable from stock
length to 4 inches longer, and it can be adjusted
right on the truck to ease the process of centering
the axle exactly. Just install the bar and turn the
adjusting sleeve till the axle is centered, it's
that simple. Solid
Steel Industries has designed a
high quality rubber bushing that is better than the
OEM bushings on the 2003 and up track bars. Using
high quality rubber bushings in the Dodge Ram track
bar provides smooth quiet
operation, with little or no vibration sent back to
the steering wheel or elsewhere on the truck. The
hardness of the rubber bushing eliminates the spongy
feeling found in other, softer, rubber bushings,
while still providing the right amount of deflection
to reduce wear and hammering. These bushings do not
hammer and wear out like steel rod ends, Heim
joints, and urethane bushings.
The
Dodge Ram track bar and Track Bar Conversion Kit
will work on trucks with lifts up to 3 inches.
When used with the track bar retrofit kit can be used
on 1994-2002 Dodge Rams. Note:
As there are many different models of suspension
lifts and methods of lifting the trucks, some lifts
provide Track Bar relocation bracketry, some don't,
as long as the mounting location of the TBK does not
interfere with existing lift brackets, it will work.
Features of the Dodge
Ram track bar:
-
Made in Canada.
-
Straight bolt-on
installation on most trucks.
-
All mounting
hardware is supplied.
-
Durable
powder-coated finish.
-
Does not
interfere with the popular "Mag-Hytec"
differential cover.
There are two versions of the Solid Steel Industries
Dodge Ram track bar available:
|
|
 DAT3029402-4 – Dodge
Ram Track Bar to
be used with TBK2029402-4 on 1994 to 2002
2500 and 3500 4x4 and on 1994 to 2001 1500
4x4.
Click the Buy It Now button for pricing. |
|
|
DAT30203-4 – Dodge
Ram Track Bar fits
2003 and up 2500 and 3500 4x4.
Click the Buy It Now button for pricing. |
Call us with questions about the proper Dodge
Ram track bar for your truck.
