0

Your Cart is Empty

COVID-19 PRODUCT SUPPLY AND SHIPPING DELAYS - CLICK HERE

Free Shipping

Borgeson Universal Company

Borgeson 000970

Borgeson 000970 Steering Shaft 1970-1979 Ford Trucks

BORGESON STEERING SHAFT 000970 Ford Truck Replacement Steering Shaft Assembly

This BORGESON 970 REPLACEMENT STEERING SHAFT will fit the following Ford vehicles:

  • 1970 to 1979 Ford Bronco
  • 1970 to 1979 Ford F-100
  • 1970 to 1979 Ford F-150
  • 1970 to 1979 Ford F-250 
  • 1970 to 1979 Ford F-350

The Borgeson 000970 Heavy Duty Steering Column shaft consists of :

  • Two precision needle bearing u-joints
  • A telescoping shaft.
  • This steering shaft will accommodate Ford trucks with up to a 4" body lift.
  • Connects the factory Steering Column to the Steering Box

TheBORGESON STEERING SHAFT 970 is aheavy duty telescopic steel steering shaft that connects from the factory column to the steering box.This Borgeson 970 replacement steering shaft is considered an Extreme duty shaft with two billet steel universal joints. This Ford replacement steering shaft does not contain a Vibration damper.!

Are you finding it challenging to keep your Ford truck from wandering on the road? A replacement Borgeson 970 Steering Shaft is the answer to removing the play in the steering.Tighter steering and better handling are felt as soon as a new Borgeson 970 Ford Replacement Steering Shaft is installed in about 30 minutes or less.

Full-size Ford Pickups have a type of steering coupler that can show signs of wear in as little as 4500 miles, depending on how the truck is used. This wear, which causes play in the truck’s steering, is even more noticeable if your vehicle is used for plowing, towing or if oversized tires have been installed. Replacing the worn steering shaft with another OEM shaft only gives you a temporary fix. Borgeson has replacement steering shaft assemblies with precision needle-bearing u-joints available for 1970 to 1979 Ford Bronco, Ford F150, Ford F250, and Ford F350 trucks. These Borgeson 000970 steering shafts are replacements for the under the hood intermediate steering shaft.

The Borgeson Universal Ford Truck replacement steering shaft is installed to help to correct the classic Ford "Steering Wander."

The  000970 replacement steering shaft for the 1970 to 1979 Ford Trucks is MADE IN THE USA!Borgeson Universal Telescoping Steering Shafts 000970


  • Engine: N/A
  • Flow Rate:
  • Item Number: Borgeson 000970 
  • Make: : Ford
  • Model: F150 | F250 | F350 | Bronco
  • Year: 1970 | 1971 | 1972 | 1973 | 1974 | 1975 | 1976 | 1977 | 1978 | 1979 
  • Manufacturer Part No: 000970
  • Product Application: 1970 to 1979 Ford Bronco, F100, F150, F250, and F350.
  • Height: 4
  • Width: 34
  • Brand: Borgeson Universal
  • FAQ: What can be done if this Borgeson Shaft is too long for my truck? If the shaft assembly is too long to fit even when fully collapsed, the telescoping shaft must be cut to length. Remove the upper universal joint from the tubular end of the Borgeson assembly. Install the steering box universal joint onto the steering box input shaft. With the telescoping shaft fully extended, the tubular end should be cut so that it is flush with the tip of the steering column shaft. This will allow movement in each direction and the maximum amount of collapsibility.
  • Part Number: Borgeson 000970
  • Manufacturer: Borgeson Universal
  • Product Note: Please note that not all Ford Vehicles are built to a standardized specification.  KLM Performance strongly recommends you a test fitment prior to making any modification to the Borgeson Steering Shaft. If you alter the steering shaft the return or exchange option no longer applies to this part. 

Join our list, get first dibs.