Fleetguard - Cummins Filtration

Fleetguard LF14001NN Cummins Lube Filter - 3 Pack

In Stock and Ready to Ship


Fleetguard LF14001NN - 3

Fleetguard LF14001NN Cummins Lube Filter - 3 Pack

Fleetguard LF14001NN NANONET Oil Filter 

This Fleetguard Cummins Nanonet Oil Filter Three Pack Is In Stock and Ready For immediate Shipment!

The Fleetguard LF14001NN Cummins Filtration Lubrication Filter applications:

  • Cummins X15 diesel engines
  • Cummins ISX15 diesel engines were built after 01/01/2020
  • Cummins ISX12 diesel engines.
  • Cummins ISX12 natural gas engines.
  • Cummins ISX Diesel Engines
  • Cummins ISM Diesel Engines
  • Cummins QSX Diesel Engines
  • Cummins QSM Diesel Engines
  • Cummins QST Diesel Engines 
  • Cummins QSM Tier 3 Diesel Engines 

This product is sold in a group of Three Nanonet Oil Filters. 

The Fleetguard Cummins Filtration LF14001NN features technology features 2-in-1 media technology to optimize performance oil filtration in real-world conditions. Clean oil is the key to less engine strain and the highest level of fuel-saving when compared to any lube filter on the market.

This new oil filter was designed to meet every changing engine design and filtration specification required in today's diesel engines. This new Cummins Filtration LF14001NN spin-on extended service interval oil filter now replaces these earlier model oil filters.

  • Fleetguard LF14000NN oil filter.
  • Fleetguard LF9080 oil filter.
  • Fleetguard LF9001 oil filter.
  • Cummins 5575298 oil filter.

Fleetguard LF14001NN Oil Filter benefits:

  • NanoNet filtration media removes and retains 98.7% of all particles as small as 4 microns.
  • 100% NanoNet filtration media is a synthetic, multi-layer polymer design with a robust structure.
  • The oil Filter provides for maximum contaminant-holding capacity over the course of the filter’s service life.
  • The NanoNet media structure enables superior cold-flow ability.
  • The Fleetguard LF14000NN Oil Filter holds 11 to 24 grams more contaminants than any competitor's oil filter.
  • High cold-flow ability means less restriction and faster oil lubrication during cold start-ups, and lubricating and protecting the vital engine components.
  • Oil Filter efficiency, capacity, and cold-flow ability are all improved.

Fleetguard Cummins LF14001NN Oil Filter Specifications:

  • The LF14001NN holds between 11 to 24 grams more contaminants than competitors
  • Dust Holding Capacity of 100g, 99% efficient at 30 microns, and 72% efficient at 10 micron
  • Largest OD 120.3 mm (4.736 inches)
  • Standpipe No
  • Thread Class 7H
  • Overall Height 294.69 mm (11.602 inches)
  • Thread Form Metric
  • BPV Setting No
  • Gasket OD 120.3 mm (4.736 inches)
  • Thread Pitch 2.5 mm (.098 inch)
  • Thread Diameter 95 mm (3.74 inches)

The Fleetguard LF14001NN Oil Filter cross-reference:

  • Cummins 4367100
  • FRL 42033721
  • Q88 BD7154
  • U30 PH8691
  • V52 LF9001
  • V52 LF9080
  • P559000

The Fleetguard LF14001NN is the upgraded version of the Fleetguard LF14001NN oil filter. This new and improved lubrication filter features two kinds of 100% synthetic patented for the most advanced oil flirtation available. The LF14001NN Lube Filter employs the use of two different types of oil filtration media to provide unmatched oil filtration.

The StrataPore® oil filtration media removes larger suspendedparticles upon engine start-up for immediate protection.

The NanoNet Filtration Media removes and holds the smaller suspended particles that cause engine wear. The installation of the Fleetguard LF14000NN oil filter will provide you with greater fuel efficiency, and increased vehicle uptime.

Cummins Filtration has developed nanofibre media for Fleetguard lube filters. The pairing of NanoNet media with StrataPore® media has created a new breed of lube filter that offers higher efficiency, higher capacity, and the best cold-flow vs restriction available. This makes the LF14001NN the natural selection for providing maximum protection for your Cummins ISX engine.

Some other manufacturers use microglass in the composition of their media which can degrade and migrate downstream, causing the very damage you’re trying to prevent. With 100% synthetic NanoNet media that is engineered to last, Fleetguard filters become the superior choice, especially in challenging environments. The LF14000NN holds between 11 to 24 grams more contaminants than competitor filters.

Fleetguard LF14001NN Oil Filter is suitable for all engines which use the Fleetguard LF14000NN oil filter.

  • Engine Cummins ISX | Cummins ISM | Cummins QSX | Cummins QSM | Cummins QST | Cummins X15 | Cummins QSM Tier 3 diesel engines
  • Filter Type: Oil Filter
  • Item Number: LF14001NN
  • Make: Cummins 
  • Model
  • Year: 2020 | 2021 | 2022
  • Manufacturer Part No: LF14001NN
  • Product Application: 2020 to Current model Cummins X15 engines, Cummins ISX, Cummins ISM, Cummins QSX, Cummins QSM, Cummins QST, Cummins X15, Cummins QSM Tier 3 Diesel Engine Extended Interval Lube Filter
  • Height: 12
  • Width: 5
  • Brand: Fleetguard - Cummins Filtration
  • FAQ: What is the main advantage of using Fleetguard NanoNet filters in my Cummins engine? Fleetguard is the filter division of Cummins Filtration and Nothing Guards Like Fleetguard. The Cummins Filtration product line offers you the highest quality filters specifically engineered for a wide range of filtration systems. With advanced design and high-quality performance, Fleetguard heavy-duty filters give customers the ultimate protection for all of their equipment.
    Meets OEM specifications - Fleetguard filters are designed to meet or exceed OEM specifications to ensure engines and other systems get the maximum life and the ultimate protection for all of their equipment.
  • Part Number: LF14001NN
  • Manufacturer: Fleetguaurd
  • Product Note: The Fleetguard LF14001NN is now the standard on all new ISX engines and on any engine that previously used the LF14000NN oil filter.
  • Customer Reviews

    Based on 2 reviews Write a review