ICON Vehicle Dynamics Dodge Ram HD Carrier Bearing Drop Kit
This Icon Vehicle Dynamics 214211 1.75" Carrier Bearing Drop Kit applications:
2014 to 2020 Dodge Ram 2500 4X4
2014 to 2020 Dodge Ram 35004X4
This carrier bearing drop kit is a custom package designed specifically for the Dodge Ram heavy duty four-wheel-drive trucks with increased ride heights over 2" of lift. Each Dodge Ram truck may require the installation of this kit to reduce the driveline vibrations. Some Dodge Ram vehicles may need more drop to their carrier bearing than others. The ICON Carrier Bearing drop kit helps to eliminate the driveline vibration felt when your Ram trucks take off. Driveline vibration is standard on lift Dodge Ram trucks with a two-piece rear driveshaft. The Carrier Bearing Drop Kit uses shims to lower the elevation of the carrier bearing so that the rear driveshaft angle is closer to the similar stock driveline angles. The Dodge Ram trucks use a two-piece rear driveshaft which is prone to increased levels of drivetrain vibrations. With the installation of the ICON carrier bearing drop kit, you can recreate the OEM Dodge driveline angles on your modified Ram trucks with increased ride heights.
The ICON 214211 drop kit contains a collection of:
Two 605834 M10-1.50 X 70MM HHCS
Two 605133 3/8 SAE FLAT WASHERs
These metal shims make it simple to fine-tune the drop of your Dodge Ram vehicles carrier bearing assembly to minimize driveline vibration.