MADS Electronics SMARTY JR

In Stock & Ready to Ship



MADS Electronics Smarty Jr. J-06 Dodge Cummins Tuner / Programmer

The Smarty Jr. is the best programmer available on the market for the 2003 to 2007 versions of the Cummins 5.9L diesel available. We have many customers that were amazed by the improved driveability and throttle response offered by the SMARTY JR!

All Smarty Jr.'s tuners are loaded with the REVOsoftware and POD (Power on Demand) feature. The Smarty Jr. has proven to offer the best combination of mileage and power available. No other programmers can touch it for throttle response, period. If you need more options and adjustability, the original Smarty is what you are after. If you strictly want to have increased diesel fuel economy than the pick the Smarty Jr.

The MADS Electronics Smarty Jr. POD Tuner for the 5.9L Cummins Turbo Diesel.

Each performance enhancer in the Smarty line gives you the ability to choose several levels of increased power or reduced fuel consumption, according to your current driving needs and or driving style.

KLM Performance offers FREE SHIPPING on the MADS Electronics SMARTY JR.

The MADS Electronics Smarty-JR is for the 2003 to 2007 Dodge Ram trucks powered with the 5.9L Cummins Diesel.

Key features of theMADS Electronics SMARTY JR POD for the Dodge Cummins Turbo Diesel 5.9L

  •     40 / 70 / 100 hp power levels
  •     Lowest EGT's in the industry
  •     Improved fuel economy
  •     Optimized drivability
  •     Internet updatable for latest software available
  •     Easy installation
  •     No tools necessary - no fuses to pull
  •     Fastest programming in the industry
  •     POD Software adds adjust-ability and the potential for even greater mileage gains
  •     Cold weather 3 Cylinder High Idle feature enabled at all power levels
  •     USB port built in for simple updates from the internet
  •     Reads Diagnostic Trouble Codes in plain text
  •     CaTCHER software's inside
  •     The fuel rail pressure is not altered above the factory settings
  •     SMARTY JR -POD provides for both MPG improvements and Exhaust Gas Temperature reduction.
  • Under normal driving conditions, Smarty JR can be used without the need for gauges!
  • Even when towing up to GCWR MADS Electronics has proven the SMARTY JR to be safe.

This MADS Electronics SMARTY JR is geared toward the customer who wants reliable and safe power for both the engine and the transmission combined with good fuel mileage. One of the main design criteria of the MADS Electronics SMARTY Jr. POD during the development of the performance software have been to lower the EGT's and provide the lowest smoke levels possible. When using the MADS Electronics SMARTY JR at the highest horsepower level, the typical exhaust gas temperatures are on average 200 degrees F cooler than with stock software!
The MADS Electronics SMARTY JR was tested on stock trucks using a Dyno. Stock means just that - off the factory floor.
Even the air filters and wastegate settings were left stock for this dyno testing.

MADS Electronics ran a "baseline" ( the stock truck Hp at the rear wheels ) twice in a day to be sure about our findings. The above declared HP numbers are all rounded down to the closest number. All Horsepower increases are verified by the Dyno tests and are stated as right rear wheel HP gains.

The Smarty does have its limitations. The Smarty cannot do one thing for you! Fix what others have broken. Smarty can not restore a key on counter that another downloader has erased. Smarty cannot fix VIN# troubles caused by other products. If your Check engine / ABS light is on because another product has screwed up your ECM, Smarty cannot fix it.

ABS / Speedo recalibration: the tire height can be adjusted up to 44" in increments of a tenth of an inch in just a couple of seconds. Of course, the Smarty J67 needs to be VIN# locked to the truck to get into the ABS adjustment section.

TheMADS Electronics SMARTY Jr. has a Diagnostic Trouble Code Reader - DTC Code reader: the name says it all.

With a MADS Electronics SMARTY JR, you can read and erase the DTC codes. The DTC Codes are displayed in plain English. The MADS Electronics Smarty-JR will clear ABS codes as well as display them.

ECM update speed faster than anything else on the market! Again we've done our research on the protocol. Less than 5 minutes. Three times faster than a Star-Scan diagnostic tool or competitor.

Mads Electronics has developed their bootloader not to have to pull fuses should an update become interrupted for any reason. All you have to do is to turn the key off and the Smarty does everything else on its own.

  • Engine: 5.9L
  • Flow Rate:
  • Item Number: SMARTY JR8
  • Make: : Cummins | Dodge | Ram
  • Model: 2500 | 3500
  • Year: 2003 | 2004 | 2005 | 2006 | 2007
  • Manufacturer Part No: SMARTY JR
  • Product Application: 2003 to 2007 Dodge Ram 5.9L Cummins Diesels.
  • Height: 4
  • Width: 8
  • Brand: MADS Electronics
  • FAQ:
  • Part Number:
  • Manufacturer: MADS Electronics
  • Beam Pattern:
  • Product Note: