Mopar 68002441AC MAF Mass Air Flow Sensor 6.7L Cummins 07.5-18

Mass Airflow Sensor - MAF Sensor for 2007.5 to 2018 Dodge Ram 6.7L Cummins 

This OEM Mopar Mass Air Flow Sensor is one of the multiple electronic sensors located on the intake side of your 6.7L Cummins diesel engine. This MAF sensor is used to transmit vital information regarding airflow calculations to the engine ECM.  This MAF sensor data is then used by the ECM to determine fuel delivery rates and engine timing. The MAF Sensor is a vital engine sensor that must be running correctly for optimum engine performance. 

Mopar 68002441AC Mass Airflow Sensor Applications:

• 2007.5 Dodge Ram 2500, 3500, 4500 and 5500 Series trucks with the 6.7L Cummins
• 2008 Dodge Ram 2500, 3500, 4500 and 5500 Series trucks with the 6.7L Cummins
• 2009 Dodge Ram 2500, 3500, 4500 and 5500 Series trucks with the 6.7L Cummins
• 2010 Dodge Ram 2500, 3500, 4500 and 5500 Series trucks with the 6.7L Cummins
• 2011 Dodge Ram 2500, 3500, 4500 and 5500 Series trucks with the 6.7L Cummins
• 2012 Dodge Ram 2500, 3500, 4500 and 5500 Series trucks with the 6.7L Cummins
• 2013 Dodge Ram 2500, 3500, 4500 and 5500 Series trucks with the 6.7L Cummins
• 2014 Dodge Ram 2500, 3500, 4500 and 5500 Series trucks with the 6.7L Cummins
• 2015 Dodge Ram 2500, 3500, 4500 and 5500 Series trucks with the 6.7L Cummins
• 2016 Dodge Ram 2500, 3500, 4500 and 5500 Series trucks with the 6.7L Cummins
• 2017 Dodge Ram 2500, 3500, 4500 and 5500 Series trucks with the 6.7L Cummins
• 2018 Dodge Ram 2500, 3500, 4500 and 5500 Series trucks with the 6.7L Cummins

What can cause a MAF Sensor to malfunction?

One of the most common reasons for the MAF Sensor to malfunction and send incorrect signals is contamination. If you fail to change the air filter at the recommended service interval this can cause a big problem. The MAF sensor is extremely sensitive to particle contamination. This can occur when dirt or oil becomes attached to the electrodes in the sensor. We at KLM Performance strongly recommend not touching any part of this sensor with bare hands!

The Warning Signs or Symptoms Of A Malfunctioning MAF Sensor - Mass Air Flow Sensor:

• A decrease in engine power levels.
• The engine is hard to start or turn over
  
• Abnormal engine noises.
• The engine stalls shortly after starting
  
• The vehicle experiences hesitation and jerking while accelerating
• The engine runs rich while idling or lean while running
• There is excessive exhaust smoke being emitted while the engine is running.
• High levels of improper fuel usage,
• abnormal engine noises, or noticeable fuel odors
• The Check Engine Light is illuminated

The Mopar 68002441AC is the most current version of this MAF Sensor available from Chrysler and it supersedes these part numbers:

• Mopar 68002441AA
• Mopar 68002441AB

The OEM Mopar MAF Sensor replacement is a straightforward repair and can easily restore the proper operation of your 6.7L Cummins diesel engine. 

• Engine: 6.7L Cummins
• Flow Rate:
• Item Number: Mopar 68002441AC
• Make: : Cummins | Dodge | Ram
• Model: 2500 | 3500 | 4500 | 5500
• Year: 2007 | 2008 | 2009 | 2010 | 2011 | 2012 | 2013 | 2014 | 2015 | 2016 | 2017 | 2018 | 2019
• Manufacturer Part No: Mopar 68002441AC
• Product Application: 2007.5 to 2018 Dodge Ram 2500, 3500, 4500, 5500 Diesel trucks
• Height: 5
• Width: 4
• Brand:
• FAQ:
• Part Number: 68005241AA 
• Manufacturer: Mopar
• Beam Pattern:
• Product Note: Mopar Electronic Cummins Engine Parts Are A Non-Returnable Item. Please make sure you have ordered the correct Mopar part for your Cummins diesel engine!