Fluidampr Ford Diesel Harmonic Dampers For The Powerstroke Diesels

Fluidampr Diesel Dampers are ideal for anyone looking for a replacement damper to the individual looking for a superior harmonic balancer for a diesel engine with increased power. Motor Fluidampr harmonic crankshaft balancer have you covered from stock power to a full-blown competition. A standard stock damper is considered a worn item. A diesel engine performance upgrade drastically increases the destructive torsional vibrations produced with every single power stroke of an internal combustion engine.

Fluidampr manufacturers American Made High-Performance Harmonic Dampers for these Ford Super Duty Truck Engines:

• Ford 7.3L Power Stroke diesel 1994 to 1997 models
• Ford 7.3L Power Stroke diesel 1999 to 2003 models
• Ford 6.0L Power Stroke diesel 2003 to 2009 models
• Ford 6.0L Power Stroke diesel 2003 to 2007 models with Dual Alternator Pulleys
• Ford 6.4L Power Stroke 2008 to 2010 models
• Ford 6.7L Power Stroke 2011 to Current Models

Why Do I Need A Performance Harmonic Balancer / Crankshaft Damper? Install any performance parts that increase the engine's power output or torque, such as intake, rods, pistons, flywheel, flexplate, fuel pump, injectors, exhaust, cams, and any ECM changes typically will increase in torsional vibration magnitude and frequency. These performance upgrades also increase the torsional vibrations above the OEM damper that was not designed to handle. A stock harmonic balancer is tuned for a 50hz peak variance at a particular power level. Alter any of the engine's rotating assembly parameters, and it may leave your critical engine components unprotected when torsional vibration is at its peak.

Signs that your OEM stock vibration damper is now failing:

• The bonded rubber on the harmonic balancer is now cracked or cracking. 
• It is bulging or missing rubber between the hub and outer ring. 
• Age and repeating heat cycles have caused the rubber to degrade.
• The driver or occupants notice an increased level of vibrations.

Signs that the OEM stock vibration damper has failed:

• A collective failure will be the outer ring separating from the hub causing damage inside the engine bay. 
• A failing damper produces a noticeable increase in the level of the in-cab vibrations. 
• The wobble of your damper is apparent during engine operation.
• The damper's outer ring is separating from the hub.

Due to the countless combinations of performance upgrades, the simplest and most cost-effective solution for controlling bad torsional vibrations is to install a Fluidampr performance diesel damper. By design, Fluidampr viscous vibration dampers protect your engine from torsional vibrations across a broad range of frequencies and power levels. The sooner a Fluidampr performance viscous damper is installed, the more you'll benefit from its protection, performance, and the ability to ensure long-term engine life.

What exactly does a Harmonic Balancer Do?

The harmonic balancer's job is to control the destructive crankshaft torsional vibration produced with each engine's power stroke during the combustion process. The power cycle of the engine generates a twist and rebound effect upon the crankshaft, which causes torsional vibrations or harmonic RPMs. Torsional vibrations are the end-to-end twisting or rebound motion exerted on the crankshaft during each power stroke. A torsional harmonic balancer controls these forces and increases valve train and timing efficiency. The other benefits obtained by installing a viscous crankshaft damper are a reduction in the wear of critical engine components such as main bearings, oil pump, and the crankshaft itself.

Fluidampr High-Performance Diesel Crankshaft Damper Benefits:

• Designed to accommodate stock to extreme power levels.
• It Will not wear out and will last the life of your engine. 
• Fluidampr torsional vibration dampers never need to be tuned or rebuilt. 
• A viscous engine balancer saves you the expense of costly rebuilds related to damper failure. 
• A Viscous damper continuously adjusts in real-time to control torsional vibrations at all power levels and engine RPMs. 
• Fluidmapr viscous dampers are 100% Made in the USA! 
• Fluidampr viscous damper you will reduce wear on the main bearings, timing gear, and valve train operation. 
• Will reduce the risk of Oil Pump Failure. 
• It provides a more accurate valve train operation. 
• Lower the possibility of crankshaft failure. 
• Fluidampr® – Performance Diesel replacement dampers automatically adapt to your modifications. 
• Fluidampr vibration dampers are precision machined and computer balanced components. 
• The Vibratech Damper is approved for Racing applications with its SFI 18.1 rating.

What Makes the Fluidampr®Performance Diesel Damper the best:

• Continuously self-tunes in real-time to the exact bandwidth of harmonics produced by the engine. 
• Optimizes damping at both stock and peak levels 
• Only a Viscous Damper controls damaging engine vibrations across a broad changing frequency and rpm range. 
• These dampers are SFI Approved. 
• Made in the USA at an ISO 9001 Certified Facility. 
• Almost every top engine builder uses them to ensure peak engine performance under the harshest conditions.

The Fluidampr Viscous Harmonic Balancers are proudly MADE IN THE USA!