Polaris RZR 800 XP 900 XP 1000 ARP Head Stud Kit

ARP Pro Series Cylinder Head Studs 288-4701

ARP Polaris RZR 900cc Head Stud Kit
ARP Polaris RZR 1000cc Head Stud Kit

A blown head gasket on your Polaris RZR will cause you to endure costly repairs. The Polaris stock cylinder head bolts from the factory are not designed for increased power levels in the motor. These OEM head bolts are prone to stripping and backing out. The installation of the Automotive Racing Products Head Stud Kit will give your Polaris RZR the strength it needs to keep running strong as it replaces all eight fasteners in the cylinder head. This Polaris Head Stud Kit Includes an Allen head for easy removal and installation of the new ARP studs. This direct factory replacement requires no drilling or tapping required for installation.

The ARP 288-4701 Polaris Razor head stud kit applications:

2015 Polaris RZR XP 1000
2016 Polaris RZR XP 1000
2017 Polaris RZR XP 1000
2018 Polaris RZR XP 1000
2019 Polaris RZR XP 1000
2020 Polaris RZR XP 1000
2021 Polaris RZR XP 1000
2022 Polaris RZR XP 1000
2015 Polaris RZR XP 900
2016 Polaris RZR XP 900
2017 Polaris RZR XP 900
2018 Polaris RZR XP 900
2019 Polaris RZR XP 900
2020 Polaris RZR XP 900
2015 Polaris RZR 800
2016 Polaris RZR 800
2017 Polaris RZR 800
2018 Polaris RZR 800
2019 Polaris RZR 800

ARP 288-4701 Polaris Razor Head Stud Kit head stud attributes:

These precision head studs are manufactured to exact tolerances.
Allows gaskets and cylinder heads to glide into position for perfect alignment. And are perfectly aligned.
High-Performance Cylinder Head Studs are thread rolled after heat-treat, which gives them about 1000% (that's ten times) better fatigue strength.
The head stud kit provides a more consistent clamping force that compensates for head gasket compression when the cylinder heads are installed.
It helps prevent blown head gaskets and assures optimum engine sealing!
The installation of this ARP Head Stud Kit is recommended when increasing the power lower of your Polaris RZR UTV.
This high-quality head stud kit will increase torque output by replacing your OEM bolts.
Constructed from premium quality heat-treated ARP2000 Alloy steel.
These ARP Head Studs are to be torqued to 85 Foot / Pounds

The Polaris Razor Cylinder Head Stud Kit contains the following:

Six ARP 8740 Cylinder Head Studs with Allen Heads
Six 12 Point 8740 Nuts
Six 8740 Washers Nuts
Two ARP Bolts for the Cylinder
One packet Of The ARP Assembly Lubricant.
Installation Instructions
ARP Stickers

You won't find a superior quality head stud from any other source on the market. Look for ARP stamped on each stud as your assurance of quality. Automotive Racing Products manufactures the best available Polaris Head Stud Kit for your UTV. The ARP head studs are used by professional engine builders in all forms of racing. The ARP Polaris stud kit installation is straightforward and allows for trouble-free increased power levels. KLM Performance highly recommends this kit for the increased clamping force needed when you are installing a new turbocharger or raising the engine's compression level.

If you have increased the power level of your Polaris 900CC / 1000CC Razor above the stock power level KLM Performance strongly recommends the purchase of the ARP 188-5401 Polaris RZR Main Stud Kit.

This Polaris Head Stud Kit is a must-have for race engines running High-Performance options like a turbocharger, big bore kit, or engines with increased compression levels. The ARP Polaris Head Stud Kit replaces all eight fasteners on the cylinder head with the ARP 8740 chromoly steel alloy. This High-Performance American Made ARP Cylinder To Head Stud Kit is designed for use on these Polaris engines. The 2014 to 2022 Polaris RZR 1000, RZR 900, RZR XP900, RZR 800, RZR4 1000, and RS1 engines.

These ARP Polaris Studs are MADE IN THE USA! ARP 288-4701 Polaris 900cc/1000cc RZR head stud kit

Engine : 800 | XP1000 | XP900
Head Stud Material: ARP 2000 Alloy
Item Number: ARP 288-4701
Make: Polaris
Model: Razor | RZR
Year : 2014 | 2015 | 2016 | 2017 | 2018 | 2019 } 2020 | 2021 | 2022
Manufacturer Part No: ARP 288-4701
Product Application: 2014 to 2022 Polaris RZR 1000, RZR 900, RZR XP900, RZR 800, RZR4 1000, and RS1 engines.
Height: 4
Width: 10
Brand: ARP
FAQ: Do I need to install the ARP Head Studs in my Polaris UTV? Any engine rebuild will obtain increased reliability from the installation of the ARP2000 Head Studs. These were studs specifically designed to withstand the high boost and horsepower these engines can produce with simple modifications the OEM studs were not designed to handle.
Part Number: 288-4701
Manufacturer: ARP
Product Note: The ARP Pro Series cylinder head studs are cold-forged to ensure molecular integrity and heat-treated prior to thread rolling and machining. ARP Pro Series kits feature twelve-point nuts and hardened parallel washers for even load distribution and accurate torque readings. Please get in touch with KLM Performance if you have any questions regarding the proper part or application before purchasing this ARP Head Stud Kit. ARP products that have been opened are NON-RETURNABLE items. Please note that you have obtained the correct part before opening the factory-sealed package!

Join our list, get first dibs.