FASS High Efficiency 144 Micron FASS Fuel System Replacement Filter for Fuel Air Separation Systems Signature Series Titanium - Wire Mesh - Particulate Filter
The FASS PF-3001 is a 144 Micron High-Efficiency Fuel Water Separator Filter for the following FASS Fuel Air Separation Systems:
FASS Titanium Series Lift Pump with the Grey Body
FASS Titanium Signature Series Lift Pump
FASS PF-3001 Fuel Filter benefits:
This FASS diesel fuel water separator filter offers a 144 Micron Filtration Rating
The FASS PF-3001 filter must be used in combination with the FASS WXS-3002 fuel water separator filter.
Installation of the FASS PF-3001 filter is on the suction side of the FASS Titanium series fuel pump.
This diesel fuel water separator filter provides increased diesel fuel flow rates.
This diesel fuel filter provides reduced FASS pump noise levels.
This diesel fuel filter provides reduces cavitation rates caused by high flow rates and fuel pressure delivery rates.
The new XWS-3002 MUST be used in conjunction with the PF-3001, the new filters cannot be used in combination with the FF-3003/FF-3010 or FS-1001/FS-1020.
When replacing the discontinued FASS Titanium Series diesel fuel filters with the new XWS-3002 and PF-3001, the XWS-3002 will now be placed on the pressure side of the pump and the PF-3001 will be placed on the suction side.
FASS Titanium Series PF-3001 Replacement Fuel Filter Change intervals are between 15,000 to 30,000 miles based on Fuel Quality.
NOTE: Please see the filter installation diagram located on each fuel filter to ensure the proper filter is installed on your FASS Titanium Series lift pump. The use of Bio-Diesel, Vegetable Oil, and Blended Fuels can significantly reduce the life expectancy of your FASS fuel filters.
Engine:Any diesel engine running a FASS Titanium or Titanium Signature Series fuel pump.
Flow Rate: 95 to 260 Gallon Per Hour FASS Systems
Item Number: FASS PF-3001
Fuel Type: Diesel Fuel
Filtration Level: One Hundred Forty-Four Microns
Filtration Media: Wire Mesh Particulate Filter
Manufacturer Part No: FASS PF-3001
Product Application: FASS Fuel Systems Titanium Series and Titanium Signature Series Fuel and Air Separation Systems
FAQ: What is the recommended change interval for this filter? The fuel filter change interval is 15,000 to 30,000 miles. This interval is based upon the type of fuel and fuel quality used. A shorter change interval is recommended when running Bio-Diesel.
Manufacturer:FASS Fuel Systems
Product Note: One Hundred Forty-Four Micron Rated FASS Diesel Fuel Filter removes suspended contaminants from your diesel fuel.