This FASS diesel fuel filter offers a 144 Micron Filtration Rating
The FASS PF-3001XL filter must be used in combination with the FASS WXS-3002 fuel water separator filter.
Installation of the FASS PF-3001XL filter is on the suction side of the FASS Titanium series fuel pump.
This diesel fuel filter provides increased diesel fuel flow rates.
This diesel fuel filter provides reduced FASS pump noise levels.
This diesel fuel filter provides reduces cavitation rates caused by high flow rates and fuel pressure delivery rates.
The new XWS-3002XL or XWS-3002 must be used in conjunction with the PF-3001XL, the new filters cannot be used in combination with the FF-3003/FF-3010 or FS-1001/FS-1020.
When replacing the discontinued FASS Titanium Series diesel fuel filters with the new XWS-3002 and PF-3001, the XWS-3002 will now be placed on the pressure side of the pump and the PF-3001XL will be placed on the suction side.
The FASS XWS-3002XL Hydroglass Extreme Diesel Fuel Water Separator Filter benefits:
Removal of Emulsified Water
Removal of Entrained Water
Filtration down to a Two Micron Level.
Improved Water Removal from your diesel fuel.
This is a direct replacement fuel/water separator for the FASS Titanium Series and Titanium Signature Series lift pump systems
This new FASS fuel filter has a diesel fuel flow rate of twenty-five gallons per minute at one hundred PSI.
This larger filter offers a higher diesel fuel contaminant level holding capacity.
Your FASS lift pump has a suggested filter change interval of 15,000 to 30,000 miles. This FASS XL filter change interval can be reduced due to the following conditions:
Use of fuel with high water content.
Use of poor quality fuel
Use of Bio-Diesel
Use of Vegetable Oil
How does the FASS XWS-3002XL Extended Length Fuel Water Separator Filter With Hydroglass filtration media work?
This Hydroglass filter removes common contaminants such as dirt, dust, and rust while absorbing any water that may be present in your fuel. The super-absorbent media absorbs water while allowing fuel to pass through the filter. When the media swells, the flow is restricted, telling you that the filter needs to be changed. The spin-on design makes changing out your filter quicker and easier than ever.
The supply of Clean, uncontaminated fuel is key to maximum fuel system performance and longevity for modern diesel engines. Without high-quality fuel filtration and regularly scheduled service, fuel contamination can lead to costly repairs and engine downtime. A fuel cleanliness study found that more than 50% of fuel used worldwide does not meet the suggested industry cleanliness levels. Fuel injection system suppliers today require that fuel entering the fuel injection system have ISO cleanliness levels as low as 11/8/3*. Dirt and contaminant removal and effective fuel/water separation with high quality, filtration reduces component wear and create optimized fuel atomization and engine power.
FASS Titanium Series PF-3001XLFASS Titanium Series Extended Length Particulate Filter Replacement Fuel Filter Change intervals are between 15,000 to 30,000 miles based on Fuel Quality.
NOTE: Please see the filter installation diagram located on FASS Titanium Signature Series Extended Length Filter Set as each fuel filter properly to ensure the proper fuel filtration on your FASS Series lift pump. The use of Bio-Diesel, Vegetable Oil, and Blended Fuels can significantly reduce the life expectancy of your FASS fuel filters. If you are interested in having a serviceable set of less expensive filters please see this set of FASS Titanium Series Fuel Filters.
FASS PF-3001XL Replacement FASS Titanium Series Extended Length ParticulateFuel Filter is MADE IN THE USA!
Engine:Any diesel engine running a FASS Titanium, Titanium Signature Series, Or Industrial Series Lift Pump.
Flow Rate: 95 to 290 Gallon Per Hour FASS Systems
Fuel Type: Diesel Fuel.
Filter Type: Fuel Particulate Filter and Water Separator XL Filter Pack
Filtration Rating: One Hundred Forty Four Micron Particulate Filter and Two Micron Rated Water Separator Filter.
Item Number FASS PF-3001XL
Manufacturer Part No: FASS XL Fuel Filter Pack
Product Application: FASS Fuel Systems Titanium Series and Titanium Signature Series and Industrial Series Fuel and Air Separation Systems
Brand: FASS Fuel Systems
FAQ: What is the recommended change interval for this filter? The fuel filter change interval is 15,000 to 30,000 miles. This interval is based upon the type of fuel and fuel quality used. A shorter change interval is recommended when running Bio-Diesel. What are the benefits of using the XL FASS Replacement Fuel Filters? The XL Filters have an increased containment Holding Capacity so that your filter change intervals can be increased.
Part Number: FASS XL Fuel Filter Pack
Manufacturer: FASS Fuel Systems
Product Note: We strongly recommend purchasing two sets of these FASS Extended Length Fuel Filters. The purchase of an additional set means you will save money on shipping and have the extra filters on hand when you do get a bad load of fuel or reach your change intervals. The FASS XL Fuel Filter Kit is an extended-length body that offers more contaminant holding capability. These new filters do not contain a petcock for water removal.