FASS Extended Length Replacement Hydroglass Extreme Water Separator
FASS Titanium Series Replacement XL Fuel Filter Contains:
- One XWS-3002-XL Two Micron Rated Extreme Water Separator Filter
FASS Replacement High-Efficiency Extended Length FASS Fuel System Replacement Filter for the following Fuel Air Separation Systems:
- FASS Titanium Series Lift Pump with the Grey Body
- FASS Titanium Signature Series Lift Pump With Black Pump Body
- FASS Industrial Series Lift Pump With Black Pump Body
The FASS XWS-3002-XL Hydroglass Extreme Diesel Fuel Water Separator Filter benefits:
- Removal of Emulsified Water
- Removal of Entrained Water
- Filtration down to a Two Micron Level.
- Improved Water Removal from your diesel fuel.
- This is a direct replacement fuel/water separator for the FASS Titanium Series and Titanium Signature Series lift pump systems
- This new FASS fuel filter has a diesel fuel flow rate of twenty-five gallons per minute at one hundred PSI.
- This larger filter offers a higher diesel fuel contaminant level holding capacity.
Your FASS lift pump has a suggested filter change interval of 15,000 to 30,000 miles. This FASS XL filter change interval can be reduced due to the following conditions:
- Use of fuel with high water content.
- Use of poor quality diesel fuel
- Use of Bio-Diesel
- Use of Vegetable Oil
How does the FASS XWS-3002XL Extended Length Fuel Water Separator Filter With Hydroglass filtration media work?
This Hydroglass filter removes common contaminants such as dirt, dust, and rust while absorbing any water that may be present in your fuel. The super-absorbent media absorbs water while allowing fuel to pass through the filter. When the media swells, the flow is restricted, telling you that the filter needs to be changed. The spin-on design makes changing out your filter quicker and easier than ever.
The supply of Clean, uncontaminated fuel is key to maximum fuel system performance and longevity for modern diesel engines. Without high-quality fuel filtration and regularly scheduled service, fuel contamination can lead to costly repairs and engine downtime. A fuel cleanliness study found that more than 50% of fuel used worldwide does not meet the suggested industry cleanliness levels. Fuel injection system suppliers today require that fuel entering the fuel injection system have ISO cleanliness levels as low as 11/8/3*. Dirt and contaminant removal and effective fuel/water separation with high quality, filtration reduces component wear and creates optimized fuel atomization and engine power.
FASS Titanium Series PF-3001XL FASS Titanium Series Extended Length Particulate Filter Replacement Fuel Filter Change intervals are between 15,000 to 30,000 miles based on Fuel Quality.
NOTE: Please see the filter installation diagram located on FASS Titanium Signature Series Extended Length Filter Set as each fuel filter properly to ensure the proper fuel filtration on your FASS Series lift pump. The use of Bio-Diesel, Vegetable Oil, and Blended Fuels can significantly reduce the life expectancy of your FASS fuel filters. If you are interested in having a serviceable set of less expensive filters please see this set of FASS Titanium Series Fuel Filters.
This FASS PF-3001 XL Extended Length Fuel Particulate Filter must be used with the XWS-3002 XL is now on the pressure side and the PF-3001 XL is on the suction side for proper filtration of your fuel air separation system.
We strongly recommend keeping a spare set of FASS Titanium Series Replacement Filters in your truck. Having a spare set of filters onboard is far cheaper than calling for a tow.
We strongly recommend keeping a spare set of FASS Titanium Series Replacement Filters in your truck. Having a spare set of filters onboard is far cheaper than calling for a tow.
FASS PF-3001XL Replacement FASS Titanium Series Extended Length Particulate Fuel Filter is MADE IN THE USA!
